12x4KW DMX Power Box

● Meet the national GB/T13528-92,GB/T14218-93 and other quality testing standards
● Power supply: three-phase AC380V± 10%, frequency 50Hz± 5%.
● Rated power: 12 channels 4KW, suitable for any load.
● Overload and short circuit double protection high break air switch.
● The power supply adopts three-phase five-wire system input mode, the maximum current 200A 5 bakelite plug input, safe and reliable use
● 12 channels 40A bakelite output;
● Accurately measure the voltage of three-phase electricity, and use 2X16 LCD module display, the reading is intuitive, accurate and convenient; It also has an indication LED with a three-phase power supply

● Meet the national GB/T13528-92,GB/T14218-93 and other quality testing standards

● Power supply: three-phase AC380V± 10%, frequency 50Hz± 5%.

● Rated power: 12 channels 4KW, suitable for any load.

● Overload and short circuit double protection high break air switch.

● The power supply adopts three-phase five-wire system input mode, the maximum current 200A 5 bakelite plug input, safe and reliable use

● 12 channels 40A bakelite output;

● Accurately measure the voltage of three-phase electricity, and use 2X16 LCD module display, the reading is intuitive, accurate and convenient; It also has an indication LED with a three-phase power supply

● High performance air switches with the highest working voltage of 200Vac, rated breaking capacity Icn6kV, rated impulse withstand voltage of 4kV, mechanical life of 15,000 times and electronic life of 10,000 times, with short circuit protection, overcurrent protection and isolation functions

● Built-in 12 relays with remote control, the relay is triggered instantly by high-quality copper-nickel plated material.

● With international DMX512 signal protocol, Art-net lighting network protocol, intelligent control custom protocol three control modes.

● Can be supported by intelligent control system, separate electronic control interface real-time control; The host can also manually open the on-off or real-time operation instructions of the light console through the physical button of the electrical cabinet host.

● Can independently set the initial on-off state mode when each way is powered on; Mode selection: A boot execution, B delayed execution, C immediate execution three modes;

Note: In power-on execution mode: When the power cabinet is powered on, each power line will power on the device at an interval of 0.6 seconds, and the current will have a buffer after power-on to better protect the device. This mode can replace the function of the driver.

● The body is equipped with an LCD screen that can operate the host interface.

● Dimensions (mm):L530*W410*H130

● Single weight :11KG